PROCESS CONTROL
PROCESS CONTROL
During the manufacturing of cement several test are carried out to determine if the process is being executed, configured correctly. These equipments allow an early determination of deviations in the production of cement. This way it’s possible to modify production parameters to minimize the production of non acceptable cement EN 196-6, ASTM C204, AASHTO T153
AUTOMATIC BLAINE APPARATUS. MODEL AUTOBLAINE
Standards: According to EN 196-6, ASTM C204 and equivalent
PRODUCT OVERVIEW The Blaine apparatus is used to determine the fineness of cement (and other powdery…
Published in
PROCESS CONTROL
Tagged under
Download attachments:
- Autoblaine Plus Brochure (591 download)
SAMPLE PREPARATION PRESS FOR RX ANALYSIS EQP-100-40
GENERAL DESCRIPTION The EQP-100 press, has been designed for dust sample preparation, for further X- Ray analysis.The tablet sample preparation is widely used.…
Published in
PROCESS CONTROL
X-RAY FLUORESCENCE SPECTROMETER MODEL THERMO OPTIM'X
Standards: IEC 1010-1 and EC 950 (electrical and protection). OraP (CH) radiation (totally protected system), 414.501 and BGB1.l standards. Electro-magnetic immunity: CENELEC EN 5008…
Published in
PROCESS CONTROL
Tagged under
PARTICLE SIZING ANALYZER BY LASER DIFFRACTION MASTERSIZER 2000
TECHNICAL FEATURES
Measure range in dry dispersion: 0.1 to 2000 microns.
Laser light Diffraction Technology and compensation by MIE Scattering measurement principle…
Published in
PROCESS CONTROL
VIBRATORY DISC MILL IB-RS200
Suitable for the extremely quick, loss-free and reproducible grinding of medium-hard, hard, brittle and fibrous materials to analytical fineness
INTRODUCTION After the crushing operation in the…
Published in
PROCESS CONTROL
JAW CRUSHER IB-BB100
Standards: EN-196-7
INTRODUCTION Used for the rapid, gentle crushing and precrushing of medium-hard, hard, brittle and tough materials.Their efficiency and safety makes it ideal for sample preparation…
Published in
PROCESS CONTROL
Tagged under
ALPINE SIEVE SHAKER TYPE LS-N-200 WITH SUCTION AND AIR JET
Standards: EN-196. ASTM C109,C184, C230 and C340
PRINCIPLE OF OPERATION The only thing that moves the materials being analyzed is…
ULTRASOUND CLEANING CIRCULAR BATH MODEL TS-540
Standards: EN-196. ASTM C109,C184, C230 and C340
INTRODUCTION The cleaning principle by ultrasounds consists in the use of sound waves with higher frequecies than…
ELECTROMAGNETIC DIGITAL SIEVE SHAKER RP-200N
Standards: EN-196. ASTM C109,C184, C230 and C340
SPECIFICATIONS For sieves of 200mm.Ø/203mm.Ø (optionally: 100mm.Ø/150mm.Ø)• Designed for grain precision tests. Specially recommended for chemical, pharmaceutical laboratories…
AUTOBLAINE PERMEABILIMETER
Standards: According to EN 196-6, ASTM C204 and equivalent
PRODUCT OVERVIEWThe Blaine apparatus is used to determine, through materials testing, the fineness of cement (and other powdery products)…
Published in
PROCESS CONTROL
Download attachments:
- Automatic Blaine Permeabilimeter Brochure (609 download)