Materials Testing, Cement Equipment, Tensile Steel Test, Universal Devices, blaine finesses, mortar mixer, vicat, le Chatelier, jolting table, Langavant, EN-12390, EN-10002-1, EN-196, ASTM C-305, Quality Control Projects

MFIB-2000 FOR STATIC FLEXION TESTS

MFIB-2000 MFIB-2000 Ibertest Internacional

SERVOHYDRAULIC MACHINE MFIB-2000 FOR STATIC FLEXION TESTS

According to ISO 7500, PNE-14587

SPECIFICATIONS
  • Maximun test load: 2000 kN.Static Flexion test Servohydraulic
  • Control type: Strength or displacement, eligible by the user.
  • Accuracy: Class 1 according to ISO 7500.
  • Scales: 1 full range.
  • Range of Measurement: between 40 and 2000 kN.
  • Free distance between columns: 380 x 420 mm.
  • Free distance between flexion rollers: 300 mm.
  • Supports radio and flexion punches: 60 mm.
  • Supports and flexion rollers length: 250 mm.
  • Piston stroke: 200 mm.
  • Approx. dim: (Wxdxh)2025 x 1100 x 2200.
  • Approx. net weight: 4.900 kg.
  • For materials testing according to PNE-14587 Standard.
  • Servocontrol: strength or displacement, selectable
    by the user (adjustable amplitude in kN or mm).
    Optional, deformation control

MAIN FRAME MFIB-200

  • Designed to carry out static flexion tests on railways (samples or finished products).
  • High stiffness frame, pre-stressed, 4 columns, with fixed crosshead.
  • The stiffness of the frame is 2000 kN/mm.
  • Base in steel, 650 x 1500 mm with flexion table provided with a central groove (T-shape) for the separation adjustment of the lower flexion rollers.
  • The superior crosshead supports the double effect servo hydraulic cylinder, with asymmetric chambers and simple pushing rod.
  • Perimeter protection cage, manufactured with high stiffness steel tubes.
  • Access doors (frontal and rear) to facilitate the sample insertion.
  • Rails montage support system, consisting of a detachable bar, guided by means of bronze tips mounted over the lateral machine protections

SERVO CONTROLLER HYDRAULIC GROUP

  • Work flow: 12 l/min
  • Two 5,5 kW motor-pump groups.
  • MOOG series servo valve. Nominal flow: 10l/min
  • Fixed flow pump, maximum pressure 275 bar.
  • Tank capacity: 80 litres.
  • Pressure filter:3 μ, low load lost.
  • Filter alarms (2), max oil temperature and tank level. Additional alarm for over pressures
  • Refrigeration by means of of oil/cooled water system.
  • Total power:: 7 kW aprox.
  • Aprox weight 250 kg
 hydraulic_group

STRAIN GAUGE TRANSDUCER FOR THE LOAD MEASUREMENT

  • Output: +/-2 mV/V
  • Repeatability: +/-0,05 %
  • Non linearity: +/-0,2 %
  • Hysteresis: +/-0,2 %
  • Zero balance: +/-1,0 %
  • Nominal bridge resistance: 350 Ohm
  • Temperature compensation between +21and+77ºC
  • Working temperature range:-54 to +93 º C

The data obtained is used for two applications: test results and to allow the MD series control system to calculate the kN/sec load speed.

EPROM memory incorporated for safe calibration parameters saving. Even if the machines control fails, these data won’t be lost.

Additional load cells could be installed, to increase the load measuring capacity or for special applications. Anyhow, the 0.5 class is always assured.

SERVOCYLINDER

Double effect, simple shaft and symetric chambers.
Main specifications:
  • Chromed piston, placed over on the housing by low friction joints.
  • Temposonic III position gauge, placed on the shaft.
  • Power supply 24Vdc. SSI communication protocol.
  • Screwed shaft for direct test devices mounting.servocylinder_piston

ELECTRIC BOARD

In appropriate metallic cupboard, wall mounted.

MAGNETO STRICTIVE TRANSDUCERS MOD.SSI

  • Maximum stroke: 200 mm
  • Resolution: 0,001 mm.
  • Linearity: + 0,05% end of scale
  • Repeatability: + 0,01% end of scale.
  • Hysteresis < 0.07 mm.
  • Use temperature: from -10º C to +70º C.
  • Estimated useful life: higher than 4 million hours.

punzon_mfib200

CONTROL AND DATA ACQUISITION SYSTEM MD2

SOFTWARE, FOR STATIC TEST UNDER WINDOWS, WINTEST.MET
- Sampling frequency: 1kHz (1000 readings/sec)
- Resolution: 180.000 real points.
- Closing loop time: 1 ms.
- USB 2.0 connection to PC

See particular technical specifications in MD Series Brochure

MFIB 2000 MD2 control system


 Powerfull configuration and adaptation tools for high demanding users and applications.
Any type of test and standard could be configured modifying and introducing the correct parameters.
Windows compatible solution, tailored made to work with IBERTEST materials testing machines & control systems.
See particular technical specifications in WINTEST Brochure.

Wintest Software control

TELEDIAGNOSIS SYSTEM

Only for pc controlled IBERTEST materials testing machines

Allows a direct links between the machine (any place with pone connection) and the Technical service of IBERTEST.

With this link the Post sale service of IBERTEST could easily diagnose and, most of times correct, the failures detected in the software without the need of a technical displacement.

telediagnosis system Ibertest


 

 

 

 

 

 

 

 

 

Devices designed for materials tests

Read 1222 times
Published in SPECIAL DEVELOPMENTS
Tagged under
Social sharing
Download attachments:

Related items (by tag)

More in this category: SERVOHYDRAULIC MACHINE MFIB UFIB-1000 »
back to top