UNIVERSAL TESTING FRAME MOD. PFIB-750-MD2
Standards: EN-10002-1, UNE-7281,DIN-51220,51222,51223,51227,51228,ASTM-E4,BS-1610
For compression and bending over big dimensions elements
- Compression and longitudinal bending: over concrete pipes up to 2 m diameter
- Bending: 3 or 4 points over beams (concrete, Wood, steel, premanufactured elements, etc) Up to 7 meters length with the appropriate testing devices.
- General bending and compression test over any type of material
Class 1 according to ISO 7500
Max test load: 750 kN
Load measurement: universal strain gauge load cell, seruial mounted with the piston. Linerarity:better than 0,15% at full scale Hysteresis:better than 0,2% at full scale
Piston Stroke: 300 mm. (+/- 150 mm)
Free vertical distance: between load cell and lower table (without testing devices), adjustable by means of lateral hydraulic jacks. Up to 2570 mm.
Nº of Columns: 4
Free distance between columns: 2300 mm x 500 mm.
High testing frame stiffness due to its four columns configuration.
Adjustable height of the superior crosshead: by means of lateral hydraulic jacks with hydraulic blockage/unblockage system.
Allows different heights configuration to adapt to several samples dimensions.
Height positioning defined via software.
No additional lifting tools needed.
Wide testing frame: to facilitate the positioning of the samples and materials to be tested, as well as additional testing devices, like ovens, extensometers, etc.
CONTROL AND DATA ACQUISITION SYSTEM MD2
SOFTWARE, FOR STATIC TEST UNDER WINDOWS, WINTEST.HOR
|- Sampling frequency: 1kHz (1000 readings/sec)
- Resolution: 180.000 real points.
- Closing loop time: 1 ms.
- USB 2.0 connection to PC
See particular technical specifications in MD Series Brochure
|Powerfull configuration and adaptation tools for high demanding users and applications.
Any type of test and standard could be configured modifying and introducing the correct parameters.
Windows compatible solution, tailored made to work with IBERTEST materials testing machines & control systems.
See particular technical specifications in WINTEST Brochure.
Only for pc controlled IBERTEST machines
Allows a direct links between the machine (any place with pone connection) and the Technical service of IBERTEST.
With this link the Post sale service of IBERTEST could easily diagnose and, most of times correct, the failures detected in the software without the need of a technical displacement.
OTHER TESTING FRAMES