AXIAL, CLIP-ON EXTENSOMETERS
According to standards: Class 0.5 (EN-10.002-4)
For determination of the Yield Point and Module of Elasticity in metallic specimens.
IB/MFA2
A high precision hand-clamped extensometer, fast and easy to use.
- Class 0.5 (EN-10.002-4)
- Measurement principle: strain gauge full bridge
- Standard initial instrument measuring length (L0): 25, 30 and 50 mm (optionally 36 – 40 – 70 – 75 – 80 - 100 – 120 – 150 – 200 – 250 and 300).
- Maximum travel: 2 mm (3 mm).
- Specimen dimensions:
- Flat: from 0 to 30 mm x 30 mm. (optionally up to 90 x 90 mm)
- Round from 0 to 30 mm diameter (optionally up to 90 mm)
- Activating force: 10 – 60 cN.
- Weight: 190 g.
IB/MFA2 - MINI
Lightweight version of the previous version for very small specimens such as wires, ribbon etc.
- Class 0.5 (EN-10.002-4)
- Measurement principle: strain gauge full bridge
- Standard initial instrument measuring length (L0): 10 and 50 mm (optionally 30 – 36 – 40 – 70 – 75 – 80 – 100 – 120 – 150 – 200 – 250 – 300 mm
- Maximum travel: 2 mm (3 mm).
- Specimen dimensions:
- Flat from 0 to 25 x 25 mm
- Round from 0 to 25 mm diameter.
- Activating force: 10 – 60 cN.
- Weight: 45 g.
IB/MFA12
High extension and precision hand-clamped extensometer, fast and easy to use.
- Class 0.5 (EN-10.002-4)
- Measurement principle: strain gauge full bridge
- Standard initial instrument measuring length (L0): 25 and 50 mm (optionally 30 – 60 – 80 – 100 – 150 and 200 mm)
- Maximum travel: 12 mm (3 mm).
- Specimen dimensions:
- Flat: up to 28 X 30 mm (optionally up to 50 mm diameter and 50 x 50 mm)
- Round: from 0 to 28 mm.
- Activating force: 3 – 7 cN.
- Weight: 95 g.
IB/MFA25
The same characteristics as the previous but with a maximum elongation of 25 mm.
- Class 0.5 (EN-10.002-4)
- Activating force: 3 – 10 cN.
IB/3800 - High Elongation Extensometer 
Designed for plastics, rubber and elastomer testing, these extensometers have very long measuring ranges. Their unique design allows testing to failure and minimizes interaction with the sample.
- Linearity: 0.15%
- Output: 2 to 5 VDC, depending on model (at 10 VDC input ). Optional: 2 mV/V.
- Input: 10 Vdc (typical), 15 Vcc or VCA max.
- Unidirectional displacement (only tension)
- Operating force: 10-20 grams.
IB/MFA20
High elongation, extremely robust, fast and easy to use hand-clamped extensometer.
- Class 0.5 or 1.0 (EN-10.002-4)
- Measurement principle: inductive
- Standard L0 supplied: 50 to 100 mm (in 5 mm steps) optionally from 40 to 200 mm
- Maximum travel: 20 mm (3 mm).
- Specimen dimensions:
- Flat: from 15 x 1 mm to 30 x 30 mm (optionally up to 40 x 60 mm)
- Round: from 4 to 30 mm diameter (optionally up to 40 mm diameter)
- Activating force: 150 cN.
- Weight: 470 g.
Specially suitable for construction steel and rough materials samples.