PARTICLE SIZING ANALYZER BY LASER DIFFRACTION MASTERSIZER 2000
- Measure range in dry dispersion: 0.1 to 2000 microns.
- Laser light Diffraction Technology and compensation by MIE Scattering measurement principle according to the Standard ISO13320-1 dated November 1999.
- It includes Helium-Neon laser combined with a blue light source.
- Automatic laser alignment.
- Results report designed by the same user for the selection of the required parameters, graphics, etc.
- Typical measurement time: 5 seconds.
- Automatic configuration of the Sample dispersion system.
- Approx. weight: 31 kg.
- Power supply: 220 V
User friendly software by means of graphics giving all the needed functions for all the measurement parameters, storing and data output.
Software-driven Standard Operating Procedures (SOPs) eliminates user variability. An SOPcreation wizard helps
users to create good measurement methods. On-line help and advice on every aspect of performing a measurement available at the click of a button.
Complete compensation by MIE measurement principle and Fraunhofer approximation.
Custom Report Designer allows screen layout and printouts to be configured to suit each user.
Custom calculator allows the parameters important to your application to be defined.
Ceramic Venturi system for be used with abrasive materials like cement, Silicium carbide, quartz particles, etc.
It includes Macro software designed by Malvern for the development of one Standard Operating Procedure (SOP), which helps to accomplish the GLP (Good Laboratory Practices) requirements.
It includes a sound reduction cell which able the sound reduction to the half according to Law exigencies, established in 82 dB.
Automatic operation from the computer through Malvern software.
Accurate control for the velocity and air pressure in real time monitorized and controlled by the software.
Vacuum monitorization to ensure the results repeatability.
Power supply: 220 V.
The Delivery Includes:
Nilfisk air exhauster of 850 W power and antistatic hose.
It is included a PC station with printer. Start up and training course is also included. The delivery does not include air compression equipment:
This equipment requires compressed air supply without humidity, oil and particles, with a minimum pressure of 6 bar (90 psi) and a minimum flow of 90 litres/minute, from a compressed air ring or compressor+filter system.
Materials Testing Equipment